Call us: 1-800-893-8397

Made in USA

Bus Drops and Safety Springs

Amtec bus drop grips are made of high strength galvanized steel strand. Stainless is available upon request.
Amtec bus drop grips are easily installed and absorb tension, vibration and pull with no damage.
They support flexible cord or bus drop cable at bus duct or industrial areas.
Single eye can be used with springs by disassembling draw bar from coil, placing through eye and replacing draw bar.
Hook eyes available please consult factory.

amtec_single-eye_wide_range_bus_drop UL-Listed
Single Eye, Wide Range Bus Drop

Part
Number
Dia. Ra. Description Approx.
Breaking
Strength
Eye
Length
Mesh
Length
7304-001 .22-.32 BD-022 350 LBS. 3 3 1/2**
7304-002 .30-.43 BD-030 450 LBS. 4 4
7304-003 .41-.56 BD-041 550 LBS. 6 4 3/4
7304-004 .53-.73 BD-053 1000 LBS. 7 6
7304-005 .70-.85 BD-070 1400 LBS. 7 6 3/4
7304-006 .82-1.00 BD-082 1400 LBS. 8 8
7304-007 .96-1.25 BD-096 1500 LBS. 9 9 1/2
7304-008 1.25-1.50 BD-125 1800 LBS. 10 12 1/2**

amtec_universal_bale_wide_range_bus_drop UL-Listed
Universal Bale, Wide Range Bus Drop

Part
Number
Dia. Ra. Description Approx.
Breaking
Strength
Eye
Length
Mesh
Length
7304-009 .22-.32 BD-022-UB 350 LBS. 9 3 1/2**
7304-010 .30-.43 BD-030-UB 450 LBS. 10 4
7304-011 .41-.56 BD-041-UB 550 LBS. 12 4 3/4
7304-012 .53-.73 BD-053-UB 1000 LBS. 13 6
7304-013 .70-.85 BD-070-UB 1400 LBS. 13 6 3/4
7304-014 .82-1.00 BD-082-UB 1400 LBS. 14 8
7304-015 .96-1.25 BD-096-UB 1500 LBS. 15 9 1/2

amtec_bus_drop_safety_spring
Bus Drop Safety Springs

Part
Number
Maximum
Deflection
Description Approx.
Breaking
Strength
Length
(No Load)
L D
203-02-001 2 1/8 @40 LBS. 40 LB. Spring 600 LBS. 8 1/4 3/4
203-02-002 3 1/8 @80 LBS. 80 LB. Spring 850 LBS. 8 1/4 1

Lengths at Nominal Diameter (Inches)

* Dim with Bale Fully Extended
** Not UL Listed

 
Caution: Never use grips to approximate breaking strength - refer to working load and safety factors.