Generated by All in One SEO v4.9.2, this is an llms.txt file, used by LLMs to index the site.

# Amtec Grips - Specializing in Quality Cable Grips

Specializing in wire mesh cable grips. Your manufacturing supplier partner.

## Sitemaps

- [XML Sitemap](https://xgz.7e3.myftpupload.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Pages

- [Home](https://xgz.7e3.myftpupload.com/) - Your specialized cable grip manufacturing supplier partner. For more than 20+ years, Amtec Corp has been specializing in manufacturing quality cable grips in the USA. Combined, our key staff has over eighty years of experience in manufacturing wire mesh cable grips. Amtec Corp. is ready to assist you in your wire management needs. All our
- [Tech Data](https://xgz.7e3.myftpupload.com/tech-data) - Technical Data - PDF Downloads Downloadable, printable charts - Will open in another window. Conduit Riser Sizing Guide - 83KB Hose Containment Grips - Technical Data - 83KB Cord Grips - Technical Data - 75KB Lace and Rod Closing Instructions - 325KB Download Entire Catalog - 1,461KB
- [Metal Clad Sealing "O" Rings](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/metal-clad-sealing-o-rings) - Metal Clad Sealing "O" Rings Sealing "O" Rings provide a liquid tight seal when fittings are installed in knockouts. The stainless steel retaining "O" Ring is both moisture and oil resistant. Metal Clad Sealing "O" Rings CATALOG NUMBER N.P.T. HUB SIZE 205-09-009 3/8" 205-09-001 1/2" 205-09-002 3/4" 205-09-003 1" 205-09-004 1 1/4" 205-09-005
- [Contact Us](https://xgz.7e3.myftpupload.com/contact-us) - Contact us for more information. Customer Service / Tech Line 1-800-893-8397 30 Center Parkway Plainfield, CT 06374 Phone: 1-860-230-0006 Fax: 1-860-230-0008 Email: customerservice@amtecgrips.com Or fill out the form below anytime. Someone will reply within 48 hrs.
- [I Grips](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/i-grips) - "I" Grips Amtec I-grips are easy to attach, will control cable-arc-of-bend and provide heavy duty strain relief. Amtec I-grips are made of high strength galvanized steel strand and are recommended for indoor use only. I - Grips Galvanized Catalog Number Description Cable Diameter Range Inches Eye Length Mesh Length 7310-001 I-030 .30-.43 1.25 4 7310-002
- [Adapters](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/adapters) - Adapters Amtec adapters can be used wherever straight thread connectors and AN-MS multiple pin connectors are subjected to pull tensions, flexing, bending, twisting, and vibration, allowing the use of Amtec Grips. Electrical consoles, mobile equipment, or electrical terminations where plugs are used for connecting and disconnecting electrical circuits require additional protection. ADAPTER AND GRIP N.P.T.
- [Sealtite Grips](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/sealtite-grips) - Sealtite Grips Applications: Amtec Sealtite Conduit Grips are used in the wiring of machine tools, electrical enclosures, motors and systems where liquid-tight flexible conduit is subject to flexture, vibration, motion or strain. Sealtite Fitting w/Mesh Non-Insulated TRADE SIZE STRAIGHT MALE 90° 45° 3/8” STM-38 STM-38-90° STM-38-45° 1/2” STM-50 STM-50-90° STM-50-45° 3/4” STM-75 STM-75-90° STM-75-45° 1”
- [Backshell Adapters](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/backshell-adapters) - Backshell Adapters Applications: Amtec Backshell Adapters are devices for mating AN-MS Connectors and other connectors with straight threads. They eliminate the use of an adapter and incorporate all the features of an Amtec Deluxe Cord Grip. Amtec Backshell Adapters eliminate the need for the cord clamp nut on AN-MS Connectors when subjected to pull tensions,
- [Deluxe Cord Grips](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/deluxe-cord-grips) - Deluxe Cord Grips Amtec Deluxe Cord Grips are used whenever cable or cord must withstand extreme applications and environmental conditions. Widely used with switch boxes, power duct cut-outs, drop stations, power hand tools, moving parts of machinery, pumps, compressors, and bus drop installations. Endless weave provides smooth cable-hugging ends for construction free installation. THREAD SIZE
- [Female Cord Connectors](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips/female-cord-connectors) - Female Cord Connectors Female Cord Connectors ALUMINUM 1 1/4” - 2” NPT NPT HUB SIZE DIAMETER RANGE FORM SIZE CATALOG NUMBER INCHES 3/8” .062 - .125 .125 - .187 .187 - .250 .250 - .312 .312 - .375 .375 - .437 F1 FCG12F1 FCG18F1 FCG25F1 FCG31F1 FCG37F1 FCG43F1* 1/2” .062 - .125 .125 - .187
- [45° Male Cord Connectors](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips/45-male-cord-connectors) - 45° Male Cord Connectors 45° Male Cord Connectors ALUMINUM 1/2” - 1” NPT NPT HUB SIZE DIAMETER RANGE FORM SIZE CATALOG NUMBER INCHES 1/2” .062 - .125 .125 - .187 .187 - .250 .250 - .375 .312 - .437 .375 - .500 F2 VCG12F2 VCG18F2 VCG25F2 VCG37F2 VCG43F2 VCG50F2 3/4” .500 - .625 .375 -
- [90 ° Male Cord Connectors](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips/90-male-cord-connectors) - 90° Male Cord Connectors 90° Male Cord Connectors ALUMINUM 3/8” - 1” NPT NPT HUB SIZE DIAMETER RANGE FORM SIZE CATALOG NUMBER INCHES 3/8” .062 - .125 .125 - .187 .187 - .250 .250 - .312 .312 - .375 .375 - .437 F1 NCG12F1 NCG18F1 NCG25F1 NCG31F1 NCG37F1 NCG43F1* 1/2” .062 - .125 .125 -
- [Straight Cord Connectors Castings](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips/straight-cord-connectors-castings) - Straight Cord Connectors Castings Straight Cord Connectors Castings ALUMINUM 2” - 3” NPT NPT HUB SIZE DIAMETER RANGE FORM SIZE CATALOG NUMBER INCHES 2” 1.250 - 1.375 1.375 - 1.500 1.500 - 1.625 1.625 - 1.750 1.750 - 1.875 1.875 - 1.937 1.937 - 2.000 F7 CG137F7 CG150F7 CG162F7 CG175F7 CG187F7 CG193F7 CG200F7 2” 1.688
- [Straight Cord Connectors](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips/straight-cord-connectors) - Straight Cord Connectors Straight Cord Connectors MACHINED ALUMINUM 1/4” - 1/2” NPT NPT HUB SIZE DIAMETER RANGE FORM SIZE CATALOG NUMBER INCHES 1/4” .062 - .125 .125 - .187 .187 - .250 .250 - .312 .312 - .375 .375 - .437 F1 CG12F1-1/4 CG18F1-1/4 CG25F1-1/4 CG31F1-1/4 CG37F1-1/4 CG43F1-1/4 3/8” .062 - .125 .125 - .187
- [Bus Drop Grips / Safety Springs](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/bus-drop-grips-safety-springs) - Bus Drops and Safety Springs Amtec bus drop grips are made of high strength galvanized steel strand. Stainless is available upon request. Amtec bus drop grips are easily installed and absorb tension, vibration and pull with no damage. They support flexible cord or bus drop cable at bus duct or industrial areas. Single eye can
- [NPT and NPS Fittings](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/npt-and-nps-fittings) - Strain Relief Grips NPT & NPS Fittings Amtec strain relief grips are wide range mesh construction with single weave, galvanized steel mesh. The one piece design is easily installed. Amtec strain relief grips are used to connect flexible cord or bus drop cable to electrical enclosures, also prevents cord or cable pullout. Insulating bushing available
- [Splicing Grips](https://xgz.7e3.myftpupload.com/products/splicing-grips) - Splicing Grips Tube Grips Amtec tube grips are made of galvanized steel in either single or double weave. They are used as a temporary splice for ropes and wire ropes as well as cable reinforcements. Single Weave Tube/Splicing Grips Part Number Dia. Ra. Description Approx. Breaking Strength 1303-002 .25-.37 TG-25-8" 400 LBS. 1303-003 .37-.50 TG-37-18"
- [Slack Pulling Single Weave Rod Closing Grip](https://xgz.7e3.myftpupload.com/products/pulling-grips/slack-pulling-single-weave-rod-closing-grip) - Slack Pulling Single Weave Rod Closing Grip Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Grips are used in
- [Slack Pulling Split Lace Closing Grip](https://xgz.7e3.myftpupload.com/products/pulling-grips/slack-pulling-split-lace-closing-grip) - Slack Pulling Double Weave Split Lace Closing Grip Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Grips are used
- [Slack Pulling Closed Mesh Grips](https://xgz.7e3.myftpupload.com/products/pulling-grips/slack-pulling-closed-mesh-grips) - Slack Pulling Single/Double Weave Closed Mesh Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Grips are used in pulling
- [Light Duty Pulling Grips](https://xgz.7e3.myftpupload.com/products/pulling-grips/light-duty-pulling-grips) - Light Duty Pulling Grips Amtec Light Duty Pulling Grips are made of high grade galvanized steel strand. They are single weave with a flexible eye for easy attachment to a pulling line. Amtec Light Duty Pulling Grips are used in general underground electrical construction where pulling tensions are low. Short Light Duty Pulling Grips Part
- [Medium Duty Utility Pulling Grips](https://xgz.7e3.myftpupload.com/products/pulling-grips/medium-duty-utility-pulling-grips) - Double Weave – Medium Duty Utility Pulling Amtec Utility Pulling Grips are made of high strength galvanized steel strand. Pulling Grips are double weave for added strength with greater mesh contact on the cable to handle longer and heavier pulling jobs. For shorter or longer lengths, please consult the factory. Standard, Machined Eye Part Number
- [Conduit Riser - Single Weave - Split Rod](https://xgz.7e3.myftpupload.com/products/support-grips/conduit-riser-single-weave-split-rod) - Conduit Riser Grips Amtec Conduit Riser Support Grips are used to support cable runs in vertical or sloping standard rigid conduit. They are designed to prevent cable creep in conduit and help prevent cable pullouts. Amtec Conduit Riser Support Grips install quickly and easily, with no damage to electrical cords. The mesh is attached to
- [Conduit Riser - Double Weave Split Lace](https://xgz.7e3.myftpupload.com/products/support-grips/conduit-riser-double-weave-split-lace) - Conduit Riser Grips Amtec Conduit Riser Support Grips are used to support cable runs in vertical or sloping standard rigid conduit. They are designed to prevent cable creep in conduit and help prevent cable pullouts. Amtec Conduit Riser Support Grips install quickly and easily, with no damage to electrical cords. The mesh is attached to
- [Conduit Riser - Single Weave Closed Mesh](https://xgz.7e3.myftpupload.com/products/support-grips/conduit-riser-single-weave-closed-mesh) - Conduit Riser Grips Amtec Conduit Riser Support Grips are used to support cable runs in vertical or sloping standard rigid conduit. They are designed to prevent cable creep in conduit and help prevent cable pullouts. Amtec Conduit Riser Support Grips install quickly and easily, with no damage to electrical cords. The mesh is attached to
- [Light Duty Service Drops](https://xgz.7e3.myftpupload.com/products/support-grips/light-duty-service-drops) - Light Duty Service Drops Amtec Service Drop Grips are used in a wide variety of light duty electrical applications such as service entrance, cable TV, telephone, fiber optics, etc., in sloping, vertical or horizontal positions. The mesh is made from high grade, non-magnetic, tin coated bronze wire. Amtec Service Drop Grips are easily installed, wide
- [Heavy Duty Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/heavy-duty-support-grips) - Heavy Duty Support Grips Amtec Heavy Duty Support Grips are designed to withstand greater loads and increased stress. Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Single Eye, Closed Mesh, Double Weave Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length
- [Hook Eye Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/hook-eye-support-grips) - Standard - Hook Eye Amtec Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Hook Eye, Closed Mesh Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length 2201-050 .50-.62 R-050-HE 450 LBS. 10 10 2201-051 .63-.74 R-062-HE 750 LBS. 10 10 2201-052
- [Universal Bale Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/universal-bale-support-grips) - Standard - Universal Bale Amtec Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Universal Bale, Closed Mesh Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length 2201-037 .50-.62 R-050-UB-18 530 LBS. 18 10 2201-038 .63-.74 R-062-UB-18 790 LBS. 18 10 2201-039
- [Offset Eye Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/offset-eye-support-grips) - Standard - Offset Eye Amtec Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Offset Eye, Closed Mesh Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length 2201-025 .50-.62 R-050-OFS 500 LBS. 4 10 2201-026 .63-.74 R-062-OFS 750 LBS. 4 10 2201-027
- [Single Eye Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/single-eye-support-grips) - Standard - Single Eye Amtec Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Single Eye, Closed Mesh Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length 2201-013 .50-.62 R-050-SE 530 LBS. 7 10 2201-014 .63-.74 R-062-SE 790 LBS. 8 10 2201-015
- [Double Eye Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips/double-eye-support-grips) - Standard - Double Eye Amtec Support Grips are made from stranded bronze wire. Stainless steel, medium lengths and or specials, please consult the factory. Double Eye, Closed Mesh Part Number Dia. Ra. Description Approx. Breaking Strength Eye Length Mesh Length 2201-001 .50-.62 R-050-DE 530 LBS. 4 10 2201-002 .63-.74 R-062-DE 790 LBS. 4 10 2201-003
- [Support Slings](https://xgz.7e3.myftpupload.com/products/hose-containment-grips/support-slings) - Support Slings Amtec support slings have a wide variety of uses. They serve as hangers, tie downs, handles, hitches, containing devices as well as tackle & slings. This unique device assembles and disassembles very easily with the lugs on the bail end sliding into and out of the keyed openings on the sliding bar. Once
- [MS90561 Connector Grips](https://xgz.7e3.myftpupload.com/products/custom-connector-grips/ms90561-connector-grips) - MS90561 CONNECTOR GRIPS QPL LISTED 22992- DSCC Qualification Letter-pdf MS90561 - CONNECTOR GRIPS JAN MARKING DFARS COMPLIANT MANUFACTURED 100% IN THE USA Markets Served: MILITARY COMMUNICATIONS AEROSPACE AUTOMOTIVE MEDICAL MINING MS Part Number AMTEC Part Number Arrangement Number A Dia + 000 - 010 H Dia Cable Range Approx. Length Max Min MS90561-1 4421-001 28-03,
- [Custom Connector Grips](https://xgz.7e3.myftpupload.com/products/custom-connector-grips) - Custom Connector Grips MILITARY APPLICATIONS: MS90561 - CONNECTOR GRIPS QPL LISTED 22992 CRES-18-8 STAINLESS STEEL CONNECTOR GRIPS DFARS COMPLIANT MATERIAL CERTIFIED TO MIL-STD-790 CUSTOM DESIGNED Power & Control Cable Strain Relief Use with all connector types, cord sets and assemblies to remove strain, vibration, flexture, or motion. Custom designed to mate with specially shaped or
- [Hose Containment Grip Types](https://xgz.7e3.myftpupload.com/products/hose-containment-grips/hose-containment-grip-types) - Hose Containment Grip Types For full or partial containment of high pressure hoses, Amtec Corp. Manufactures a full line of grips made of type 302/304 CRES 18-8 "stainless steel". Type 316 CRES "stainless steel" is available upon request. Please consult factory to determine correct grip for your application. Engineering is available to custom design or
- [About Us](https://xgz.7e3.myftpupload.com/about) - Capabilities Coming to grips with AMTEC wire mesh Amtec wire mesh grips are used in a variety of cable pulling, strain relieving and weight support applications. Wire mesh grips have traditionally been used in the utility, industrial, mining, construction and OEM markets but find new and interesting applications in the communications, information, military, medical and
- [Uses/Applications](https://xgz.7e3.myftpupload.com/usesapplications) - Uses and Applications of Wire Management Grips Amtec wire mesh grips are used in a wide variety of cable pulling, strain relieving and weight support applications. Wire mesh grips have traditionally been used in the utility, industrial, mining, construction and OEM markets but find new and interesting applications in the communications, information, military, medical, and
- [Cord Grips](https://xgz.7e3.myftpupload.com/products/strain-relief-grips/cord-grips) - Cord Grips Amtec deluxe cord grips are used whenever cable or cord must withstand extreme applications and environmental conditions. Widely used with switch boxes, power duct cut-out, drop stations, power hand tools, moving parts of machinery, pumps, compressors and bus drops installations. Endless weave provides smooth cable-hugging ends for construction free installation. * Cable jacket
- [Site Map](https://xgz.7e3.myftpupload.com/site-map) - Site Map We've updated and changed around a lot of pages here so if you're lost, take a look at the following Site Map to help you find what you're looking for or try the search box under the left-hand menu.
- [Strain Relief Grips](https://xgz.7e3.myftpupload.com/products/strain-relief-grips) - Strain Relief Grips Strain Relief Grips NPT & NPS Fittings Bus Drop Grips / Safety Springs Cord Grips Metal Clad Sealing "O" Rings Deluxe Cord Grips Backshell Adapters "I" Grips Sealtite Grips Adapters
- [Hose Containment Grips](https://xgz.7e3.myftpupload.com/products/hose-containment-grips) - Hose Containment Grips Amtec Hose Containment grips are used in a variety of high pressure, flexible hose lines to prevent the hose from whipping violently in the event of hose failure at the fitting. These grips will prevent injury to personnel and damage to equipment by holding the hose in place in the event of
- [Pulling Grips](https://xgz.7e3.myftpupload.com/products/pulling-grips) - Pulling Grips Amtec utility pulling grips are made of high strength galvanized steel strand. Pulling Grips Styles and Applications Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. Amtec light duty pulling grips are single weave with a flexible eye
- [Support Grips](https://xgz.7e3.myftpupload.com/products/support-grips) - Support Grips Styles available: Closed mesh, Lace Closing, Rod Closing Standard – Single Eye Styles available: Closed mesh, Lace Closing, Rod Closing Standard – Offset Eye Styles available: Closed mesh, Lace Closing, Rod Closing Standard – Universal Bale Styles available: Closed mesh, Lace Closing, Rod Closing Standard – Hook Eye Styles available: Closed mesh, Lace
- [Working Load & Safety Factors](https://xgz.7e3.myftpupload.com/working-load-safety-factors) - Working Load & Safety Factors The Grips in the catalog have listed approximate Breaking Strength. The approximate breaking strength of an Amtec grip represents an average calculation based on test factors, which have been determined from data established from actual testing performed in our engineering laboratories. The actual testing is performed with new Grips on
- [Products](https://xgz.7e3.myftpupload.com/products) - Products We Manufacture Support Grips Standard – Double Eye Standard – Single Eye Standard – Offset Eye Standard – Universal Bale Standard – Hook Eye Heavy Duty Support Light Duty Service Drops Conduit Riser – Single Weave Closed Mesh Conduit Riser – Double Weave Split Lace Conduit Riser – Single Weave – Split Rod Pulling