Bus Drops and Safety Springs
Amtec bus drop grips are made of high strength galvanized steel strand. Stainless is available upon request.
Amtec bus drop grips are easily installed and absorb tension, vibration and pull with no damage.
They support flexible cord or bus drop cable at bus duct or industrial areas.
Single eye can be used with springs by disassembling draw bar from coil, placing through eye and replacing draw bar.
Hook eyes available please consult factory.
Single Eye, Wide Range Bus Drop
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 7304-001 | .22-.32 | BD-022 | 350 LBS. | 3 | 3 1/2** |
| 7304-002 | .30-.43 | BD-030 | 450 LBS. | 4 | 4 |
| 7304-003 | .41-.56 | BD-041 | 550 LBS. | 6 | 4 3/4 |
| 7304-004 | .53-.73 | BD-053 | 1000 LBS. | 7 | 6 |
| 7304-005 | .70-.85 | BD-070 | 1400 LBS. | 7 | 6 3/4 |
| 7304-006 | .82-1.00 | BD-082 | 1400 LBS. | 8 | 8 |
| 7304-007 | .96-1.25 | BD-096 | 1500 LBS. | 9 | 9 1/2 |
| 7304-008 | 1.25-1.50 | BD-125 | 1800 LBS. | 10 | 12 1/2** |
Universal Bale, Wide Range Bus Drop
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 7304-009 | .22-.32 | BD-022-UB | 350 LBS. | 9 | 3 1/2** |
| 7304-010 | .30-.43 | BD-030-UB | 450 LBS. | 10 | 4 |
| 7304-011 | .41-.56 | BD-041-UB | 550 LBS. | 12 | 4 3/4 |
| 7304-012 | .53-.73 | BD-053-UB | 1000 LBS. | 13 | 6 |
| 7304-013 | .70-.85 | BD-070-UB | 1400 LBS. | 13 | 6 3/4 |
| 7304-014 | .82-1.00 | BD-082-UB | 1400 LBS. | 14 | 8 |
| 7304-015 | .96-1.25 | BD-096-UB | 1500 LBS. | 15 | 9 1/2 |
Bus Drop Safety Springs
| Part Number |
Maximum Deflection |
Description | Approx. Breaking Strength |
Length (No Load) L D |
| 203-02-001 | 2 1/8 @40 LBS. | 40 LB. Spring | 600 LBS. | 8 1/4 3/4 |
| 203-02-002 | 3 1/8 @80 LBS. | 80 LB. Spring | 850 LBS. | 8 1/4 1 |
Lengths at Nominal Diameter (Inches)
* Dim with Bale Fully Extended
** Not UL Listed
