45° Male Cord Connectors

45° Male Cord Connectors

ALUMINUM 1/2” – 1” NPT
NPT HUB SIZE	DIAMETER RANGE	FORM SIZE	CATALOG NUMBER
NPT HUB SIZE	INCHES	FORM SIZE	CATALOG NUMBER
1/2”	.062 – .125 .125 – .187 .187 – .250 .250 – .375 .312 – .437 .375 – .500	F2	VCG12F2 VCG18F2 VCG25F2 VCG37F2 VCG43F2 VCG50F2
3/4”	.500 – .625 .375 – .500 .500 – .625 .625 – .750 .750 – .875	F3	VCG62F2* VCG50F3 VCG62F3 VCG75F3* VCG87F3*
1”	.375 – .500 .500 – .625 .625 – .750 .750 – .875 .875 – 1.00 1.00 – 1.12	F4	VCG50F4 VCG62F4 VCG75F4 VCG87F4 VCG100F4* VCG112F4*

ALUMINUM 1 1/4” – 1 1/2” NPT
NPT HUB SIZE	DIAMETER RANGE	FORM SIZE	CATALOG NUMBER
NPT HUB SIZE	INCHES	FORM SIZE	CATALOG NUMBER
1 1/4”	1.00 – 1.125 1.125 – 1.250 1.250 – 1.375 1.375 – 1.437	F5	VCG112F5 VCG125F5 VCG137F5* VCG143F5*
1 1/2”	1.00 – 1.125 1.125 – 1.250 1.250 – 1.375 1.375 – 1.437	F6	VCG112F6 VCG125F6 VCG137F6 VCG143F6

* Cable jacket may have to be stripped to pass through connector.

Ready to Get Your Cable Grips?

GET STARTED

Related Products

Bus Drop Grips / Safety Springs

Bus Drops and Safety Springs Amtec bus drop grips are made of high strength galvanized steel strand. Stainless is available upon request. Amtec bus drop grips are easily installed and absorb tension, vibration and pull with no damage. They support flexible cord or bus...

NPT and NPS Fittings

Strain Relief Grips NPT & NPS Fittings Amtec strain relief grips are wide range mesh construction with single weave, galvanized steel mesh. The one piece design is easily installed. Amtec strain relief grips are used to connect flexible cord or bus drop cable to...

Deluxe Cord Grips

Deluxe Cord Grips Amtec Deluxe Cord Grips are used whenever cable or cord must withstand extreme applications and environmental conditions. Widely used with switch boxes, power duct cut-outs, drop stations, power hand tools, moving parts of machinery, pumps,...

45° Male Cord Connectors