Call us: 1-800-893-8397

Made in USA

Slack Pulling Single Weave Rod Closing Grip

  • Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line.
  • Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible.
  • Grips are used in pulling slack for final placement of underground cable after it has been pulled and for removing cable.
  • Short mesh to be used in restricted space for short pulls and longer mesh for higher pulling loads where space is not restricted.

amtec_standard_rod_closing_slack_pulling_grip
Standard Rod Closing

Part
Number
Dia. Ra. Description Approx.
Breaking
Strength
Eye
Length
Mesh
Length
3310-001 .50-.61 SPGR-50-SW 1500 LBS. 7 6
3310-002 .62-.74 SPGR-62-SW 1800 LBS. 7 8
3310-003 .75-.99 SPGR-75-SW 2200 LBS. 7 10
3310-004 1.00-1.24 SPGR-100-SW 3400 LBS. 8 12
3310-005 1.25-1.49 SPGR-125-SW 4500 LBS. 8 14
3310-006 1.50-1.74 SPGR-150-SW 5800 LBS. 9 15
3310-007 1.75-1.99 SPGR-175-SW 7600 LBS. 10 16
3310-008 2.00-2.49 SPGR-200-SW 9000 LBS. 10 19
3310-009 2.50-2.99 SPGR-250-SW 11000 LBS. 10 20
3310-010 3.00-3.49 SPGR-300-SW 12000 LBS. 12 21
3310-011 3.50-3.99 SPGR-350-SW 12000 LBS. 12 24

Lace and Rod Closing Instructions – 325KB

Mesh Length at Nominal Diameter (Inches)

 
Caution: Never use grips to approximate breaking strength - refer to working load and safety factors.