Light Duty Pulling Grips
- Amtec Light Duty Pulling Grips are made of high grade galvanized steel strand.
- They are single weave with a flexible eye for easy attachment to a pulling line.
- Amtec Light Duty Pulling Grips are used in general underground electrical construction where pulling tensions are low.
Short Light Duty Pulling Grips
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 3303-001 | .50-.61 | LD-050-S | 2800 LBS. | 5 | 11 |
| 3303-002 | .62-.74 | LD-062-S | 2800 LBS. | 5 | 11 |
| 3303-003 | .75-.99 | LD-075-S | 4000 LBS. | 6 | 12 |
| 3303-004 | 1.00-1.24 | LD-100-S | 5300 LBS. | 7 | 13 |
| 3303-005 | 1.25-1.49 | LD-125-S | 5300 LBS. | 7 | 14 |
| 3303-006 | 1.50-1.74 | LD-150-S | 6800 LBS. | 8 | 15 |
| 3303-007 | 1.75-1.99 | LD-175-S | 8500 LBS. | 8 | 17 |
| 3303-008 | 2.00-2.49 | LD-200-S | 8500 LBS. | 9 | 18 |
| 3303-009 | 2.50-2.99 | LD-250-S | 10600 LBS. | 9 | 18 |
| 3303-010 | 3.00-3.49 | LD-300-S | 14700 LBS. | 10 | 20 |
Standard Light Duty Pulling Grips
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 3303-011 | .50-.61 | LD-050 | 2800 LBS. | 5 | 16 |
| 3303-012 | .62-.74 | LD-062 | 2800 LBS. | 5 | 16 |
| 3303-013 | .75-.99 | LD-075 | 4000 LBS. | 6 | 20 |
| 3303-014 | 1.00-1.24 | LD-100 | 6800 LBS. | 7 | 20 |
| 3303-015 | 1.25-1.49 | LD-125 | 6800 LBS. | 7 | 21 |
| 3303-016 | 1.50-1.99 | LD-150 | 6800 LBS. | 8 | 23 |
| 3303-017 | 2.00-2.49 | LD-200 | 8500 LBS. | 9 | 25 |
| 3303-018 | 2.50-2.99 | LD-250 | 10600 LBS. | 9 | 27 |
| 3303-019 | 3.00-3.50 | LD-300 | 14700 LBS. | 10 | 30 |
| 3303-020 | 3.50-3.99 | LD-350 | 14700 LBS. | 10 | 32 |
Junior Light Duty Pulling Grips
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 3305-002 | .25-.36 | JP-25 | 450 LBS. | 3.25 | 4.25 |
| 3305-003 | .37-.49 | JP-37 | 900 LBS. | 3.25 | 7 |
| 3305-004 | .50-.61 | JP-50 | 1300 LBS. | 4.25 | 8.5 |
| 3305-005 | .62-.74 | JP-62 | 1950 LBS. | 5 | 10 |
| 3305-006 | .75-.99 | JP-75 | 2800 LBS. | 5.75 | 10 |
| 3305-007 | 1.00-1.25 | JP-100 | 3900 LBS | 6.5 | 11.5 |
| 3305-008 | .25-1.25 | JP KIT | |||
| KIT INCLUDES | JP-25, JP-37 JP-50, JP-62 JP-75, JP-100 |
Mesh Length at Nominal Diameter (Inches)
