Slack Pulling Single Weave Rod Closing Grip
- Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line.
- Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible.
- Grips are used in pulling slack for final placement of underground cable after it has been pulled and for removing cable.
- Short mesh to be used in restricted space for short pulls and longer mesh for higher pulling loads where space is not restricted.
Standard Rod Closing
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 3310-001 | .50-.61 | SPGR-50-SW | 1500 LBS. | 7 | 6 |
| 3310-002 | .62-.74 | SPGR-62-SW | 1800 LBS. | 7 | 8 |
| 3310-003 | .75-.99 | SPGR-75-SW | 2200 LBS. | 7 | 10 |
| 3310-004 | 1.00-1.24 | SPGR-100-SW | 3400 LBS. | 8 | 12 |
| 3310-005 | 1.25-1.49 | SPGR-125-SW | 4500 LBS. | 8 | 14 |
| 3310-006 | 1.50-1.74 | SPGR-150-SW | 5800 LBS. | 9 | 15 |
| 3310-007 | 1.75-1.99 | SPGR-175-SW | 7600 LBS. | 10 | 16 |
| 3310-008 | 2.00-2.49 | SPGR-200-SW | 9000 LBS. | 10 | 19 |
| 3310-009 | 2.50-2.99 | SPGR-250-SW | 11000 LBS. | 10 | 20 |
| 3310-010 | 3.00-3.49 | SPGR-300-SW | 12000 LBS. | 12 | 21 |
| 3310-011 | 3.50-3.99 | SPGR-350-SW | 12000 LBS. | 12 | 24 |
Lace and Rod Closing Instructions – 325KB
Mesh Length at Nominal Diameter (Inches)
