Slack Pulling Double Weave Split Lace Closing Grip
- Amtec Slack Pulling Grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line.
- Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible.
- Grips are used in pulling slack for final placement of underground cable after it has been pulled and for removing cable.
- Short mesh to be used in restricted space for short pulls and longer mesh for higher pulling loads where space is not restricted.
Standard Lace Closing
| Part Number |
Dia. Ra. | Description | Approx. Breaking Strength |
Eye Length |
Mesh Length |
| 3309-001 | .75-.99 | SPGS-75-DW | 2500 LBS. | 7 | 12 |
| 3309-002 | 1.00-1.24 | SPGS-100-DW | 3500 LBS. | 8 | 15 |
| 3309-003 | 1.25-1.49 | SPGS-125-DW | 4000 LBS. | 8 | 16 |
| 3309-004 | 1.50-1.74 | SPGS-150-DW | 4000 LBS. | 9 | 17 |
| 3309-005 | 1.75-1.99 | SPGS-175-DW | 4000 LBS. | 10 | 18 |
| 3309-006 | 2.00-2.49 | SPGS-200-DW | 4000 LBS. | 10 | 19 |
| 3309-007 | 2.50-2.99 | SPGS-250-DW | 4000 LBS. | 10 | 20 |
| 3309-008 | 3.00-3.49 | SPGS-300-DW | 4000 LBS. | 12 | 21 |
| 3309-009 | 3.50-3.99 | SPGS-350-DW | 4000 LBS. | 12 | 22 |
Lace and Rod Closing Instructions – 325KB
Mesh Length at Nominal Diameter (Inches)
